268Trouble?Unable to complete WPS.- Turn off the camcorder and access point. After a short while, turnthem on again and try again. If the problem persists, performsetup using the [Search for Access Points] option (A 202).Unable to complete WPS. Try the operation again.- Some access points require pressing and holding the Wi-Fi Pro-tected Setup (WPS) button. For details, refer to the instructionmanual of your access point.- Make sure to touch [OK] on the camcorder’s screen within2 minutes of activating the Wi-Fi Protected Setup signal on theaccess point, whether by pressing the button or by entering thePIN code.Unable to connect- To avoid interference, use the camcorder at some distance fromdevices that emit electromagnetic waves (cordless phones, micro-wave ovens, etc.).Unable to connect to the Connect Station.- An error occurred while trying to pair the camcorder with theCS100 Connect Station. Check that the connect station is readyto establish a connection and carefully hold the camcorder closeto the connect point on the connect station again (A 190).Unable to connect to the server- The camcorder could not access the external server used for theMonitor while Out function. Make sure the access point is correctlyconnected to the Internet.- Check that 1 > q > [Date/Time] is set to the correct dateand time.Downloaded From VideoCamera-Manual.com Manuals
