181The Camcorder’s Wi-Fi FunctionsTo register the camcorder’s ID in the CameraAccess plus app1 Android devices compatible with NFC: Connect the cam-corder and the device.• Perform only step 1 in Pairing an NFC-compatible Androiddevice (A 177).• Android device: When the camcorder’s ID is correctly registered,a message will prompt you to turn off Wi-Fi on the device. SelectTurn off Wi-Fi or Do not turn off Wi-Fi (to keep using Wi-Fi onthe device) and then touch Set.• Camcorder: After the Wi-Fi connection to the Android device isterminated, the camcorder will reconnect automatically to thepreviously selected access point.• The rest of this procedure is not necessary. Continue asdescribed in To use the Monitor while Out function (A 182).iOS/Android devices not compatible with NFC: On thedevice, turn on Wi-Fi and select the same access point asthat to which the camcorder is connected (step 5 in the pre-vious procedure).2 Start the CameraAccess plus app and touch Setting andthen Start.• The camcorder’s ID is registered and displayed in the CameraAc-cess plus app.3 Touch Finish and close the CameraAccess plus app.• Disconnect the iOS/Android device from the access point.Downloaded From VideoCamera-Manual.com Manuals
