Advanced Guide > Printing Photographs Directly from a Compliant Device > Printing Photographs Directly from aCompliant Device > About PictBridge Print SettingsAbout PictBridge Print SettingsSettings on a PictBridge Compliant DeviceThis section describes the PictBridge function of the printer. For the print settings on a PictBridgecompliant device, refer to the instructions given in the device's instruction manual.NoteIn the following description, names of setting items are given according to those used inCanon-brand PictBridge compliant devices. Setting item names may be different dependingon the brand or model of your device.Some setting items explained below may not be available on some devices. When youcannot change print settings on a device, the printer prints images as follows:Paper size: 4" x 6"/101.6 x 152.4 mmPaper type: PhotoLayout: 1-up, BorderlessDate/File No. Print: Not printedImage Optimize: The Photo optimizer pro function will be used for optimized printing.The following sizes and types of printing paper can be used when printing from a PictBridgecompliant device.Paper size 4" x 6"/10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), 4" x 7.1"/10.1 x 18 cm*2*1 Can be selected only on certain Canon-brand PictBridge compliant devices.(May not be selected depending on the device.)*2 Hi Vision may appear on a non-Canon brand PictBridge compliant device.Paper type Default: Photo Paper Plus Glossy II PP-201Photo:Photo Paper Plus Glossy II PP-201/Glossy Photo Paper "Everyday Use" GP-501/Photo Paper Glossy GP-502/Photo Paper Plus Semi-gloss SG-201/PhotoStickers** When printing on sticker paper, select 10 x 15 cm/4" x 6" in Paper size. Donot set Layout to Borderless.Fast Photo:Photo Paper Pro PR-201Plain:A4/LetterWhen Paper type is set to Plain, borderless printing will be disabled evenwhen Layout is set to Borderless.Layout Default (Borderless), Index, Bordered, Borderless, N-up (2, 4, 9, 16)** Layout compatible with A4- or Letter-sized paper and Canon-brand stickerabove.A4/Letter: 4-upPhoto Stickers: 2-up, 4-up, 9-up, 16-up.Print date &file no.Default (Off: No printing), Date, File No., Both, OffImageoptimizeDefault *1*2, On (Exif Print), Off, NR (Noise Reduction)*2, VIVID*2*1 Photos are optimized for printing using the Photo optimizer pro function.*2 Can be selected only on certain Canon-brand PictBridge compliant device.(May not be selected depending on the device.)Trimming Default (Off: No trimming), On (follow camera's setting), OffPage topСтр. 270 из 366 стр.About PictBridge Print Settings