Canon iP3600 SERIES On-screen Manual

Contents

Extend to open support the printouts.(9) Power buttonTurns the power on or off.NoteAuto power on/off featureYou can set the printer to turn on or off automatically.- Auto Power On: Automatically turns on the printer when print data is sent from thecomputer.- Auto Power Off: Automatically turns off the printer when no print data is sent for acertain interval.Specify this setting in the Maintenance sheet of the printer driver in Windows, or of the CanonIJ Printer Utility in Macintosh. For details on the settings, refer to the on-screen manual:Advanced Guide.ImportantDisconnecting the power plugWhen disconnecting the power plug after turning off the power, be sure to confirm thatthe Power lamp is not lit. If the power plug is disconnected from the wall outlet while thePower lamp is lit or flashing, the printer may become unable to print properly since thePrint Head is not protected.(10) Power lampLights green after flashing when the power is turned on.(11) RESUME/CANCEL buttonPress to cancel a print job in progress. You can press this button after resolving a printer error to dismissan error message and resume printing.(12) Alarm lampLights or flashes orange when an error, such as paper-out or ink-out, occurs.NotePower and Alarm lampsYou can check the status of the printer by the Power and Alarm lamps.- Power lamp Off: The power is off.- Power lamp lit green: The printer is ready to print.- Power lamp flashing green: The printer is getting ready to print, or printing is inprogress.- Alarm lamp flashing orange: An error has occurred and the printer is not ready to print.For details, refer to " Troubleshooting " in the on-screen manual: Advanced Guide.- Power lamp flashes green once and Alarm lamp flashes orange once alternately: Anerror that requires contacting your Canon service representative may have occurred.For details, refer to " Troubleshooting " in the on-screen manual: Advanced Guide.Стр. 5 из 366 стр.Main Components