Canon iP3600 SERIES On-screen Manual

Contents

Advanced Guide TroubleshootingContents > Routine Maintenance > Replacing an Ink Tank > Checking the Ink StatusChecking the Ink StatusYou can check the ink status on the ink lamps or your computer screen.With the Ink Lamps1. Make sure that the power is turned on, and open the Paper Output Tray gently.2. Open the Top Cover.NoteThe printer may make operating noise when the Print Head moves to the replacement position.3. Check the ink lamps.Ink lamp is onThe ink tank is correctly installed and there is sufficient ink left for printing.Ink lamp is flashingFlashing slowly (at around 3-second intervals)...... RepeatsInk is low. You can continue printing for a while, but we recommend you to have a new ink tank available.Flashing fast (at around 1-second intervals)...... RepeatsThe ink tank is installed in the wrong position or it is empty. Make sure that the ink tank is installed in thecorrect position as indicated by the label on the Print Head Holder. If the position is correct but the lampflashes, the ink tank is empty. Replace it with a new one.Ink lamp is offThe ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the inktank is not installed properly, press the mark (Push) on the ink tank until the ink tank clicks into place. If itdoes not click into place, make sure that the orange protective cap has been removed from the bottom ofthe ink tank. If the function for detecting the remaining ink level is disabled, replace the ink tank with a newone.See Prepare the new ink tank. .If the ink lamp is still off after reinstalling the ink tank, there has been an error and the printer cannot print.Check the Alarm lamp on the printer.Refer to " Troubleshooting " in the on-screen manual: Advanced Guide.With the Computer ScreenСтр. 42 из 366 стр.Checking the Ink Status