Canon iP3600 SERIES On-screen Manual

Contents

absorber becomes completely full, contact a Canon servicerepresentative. (You will need to replace a particular part ofthe printer.)Nine flashes:The printer has not received a responsefrom the digital camera. The digitalcamera or digital video camcorderconnected is not compatible with thisprinter.Check the device connected to the printer. Printingphotos directly is possible only with a PictBridgecompliant device.A communication time out occurs if an operation takestoo long or if it takes too much time to send data. Thismay cancel printing. In such cases, disconnect andreconnect the USB cable.When printing from a PictBridge compliant device,depending on the model or brand of your device, you mayhave to select a PictBridge compliant print mode on thedevice before connecting it to the printer. You may alsohave to turn on your device or select Play mode manuallyafter connecting the device to the printer. Performnecessary operations before connecting your devicereferring to its instruction manual.If the error is still not resolved, check if you can printanother photograph.Thirteen flashes:Ink level cannot be detected.The remaining ink level cannot be correctly detected. (Thelamp on the ink tank flashes.)Replace the ink tank and close the Top Cover.Printing with an ink tank that was once empty may damagethe printer.If you want to continue printing in this condition, you need torelease the function for detecting the remaining ink level.Press and hold the RESUME/CANCEL button for at least 5seconds, and then release it.With this operation, releasing the function for detecting theremaining ink level is memorized. Please be advised thatCanon shall not be liable for any printer malfunction ordamage caused by refilled ink tanks.Routine MaintenanceNoteIf the function for detecting the remaining ink level isdisabled, the ink tank is displayed in gray on the printerstatus monitor (Windows) and Canon IJ Printer Utility(Macintosh).Routine MaintenanceFourteen Flashes:Ink tank cannot be recognized.The ink tank is not compatible with this printer. (The lamp onthe ink tank is off.)Install an appropriate ink tank.Routine MaintenanceFifteen Flashes:Ink tank cannot be recognized.An Ink tank error has occurred. (The lamp on the ink tank isoff.)Replace the ink tank.Routine MaintenanceSixteen Flashes:Ink has run out.Ink has run out. (The lamp on the ink tank flashes.)Replace the ink tank and close the Top Cover.Printing under the current condition may damage the printer.If you want to continue printing in this condition, you need torelease the function for detecting the remaining ink level.Press and hold the RESUME/CANCEL button for at least 5seconds, and then release it.With this operation, releasing the function for detecting theremaining ink level is memorized. Please be advised thatCanon shall not be liable for any malfunction or troublewhich may be caused by continuation of printing under theink out condition.Routine MaintenanceNoteСтр. 298 из 366 стр.Alarm Lamp Flashes Orange