Canon iP3600 SERIES On-screen Manual

Contents

Advanced Guide > Troubleshooting > Printing Does Not StartPrinting Does Not StartCheck 1: Make sure that the power plug is securely plugged in, thenturn the printer on.While the Power lamp is flashing green, the printer is initializing. Wait until the Power lamp stopsflashing and remains lit green.NoteWhen printing large data such as a photo or graphics, it may take longer to start printing. Whilethe Power lamp is flashing green, the computer is processing data and sending it to theprinter. Wait until printing starts.Check 2: Check the status of ink tanks. Replace the ink tank if ink hasrun out.Check 3: Open the Top Cover and check to see if the ink lamps areflashing red.If there is still sufficient ink but its ink lamp is flashing red, an ink tank may not be installed in a rightposition.Routine MaintenanceCheck 4: Open the Top Cover and make sure that the ink lamps light upred.If the ink lamp is not lit, press the mark on the ink tank until it clicks into place.Check 5: Make sure that the USB cable is securely plugged in to theprinter and the computer, then check the following:If you are using a relay device such as a USB hub, disconnect it, connect the printer directly tothe computer, and try printing again. If printing starts normally, there is a problem with the relaydevice. Consult the reseller of the relay device for details.There could also be a problem with the USB cable. Replace the USB cable and try printingagain.Check 6: Restart your computer if you are printing from the computer.If there are any unnecessary print jobs, delete them.Deleting the Undesired Print JobCheck 7: Make sure that your printer's name is selected in the Printdialog box.The printer will not print properly if you are using a driver for a different printer.In Windows, make sure that your printer's name is selected in the Print dialog box.On a Macintosh, make sure that your printer's name is selected in Printer in the Print dialog box.NoteTo make the printer the one selected by default, select Set as Default Printer (Windows),Default Printer (Mac OS X v.10.5.x), or Make Default (Mac OS X v.10.4.x or Mac OS X v.10.3.9).Check 8: Configure the printer port appropriately.Стр. 317 из 366 стр.Printing Does Not Start