Advanced Guide > Appendix > Connecting the Printer to the Network > Settings on Print ServerSettings on Print ServerTo use a printer in a network, set printer sharing on the print server system.The procedure for setting up the print server systems is as follows:1. Install the printer driver on the print server systemFor installation instructions, see the user's manual.2. Select items from the Start menu as shown below:In Windows Vista, select the Start menu -> Control Panel -> Hardware and Sound -> Printers.In Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware ->Printers and Faxes.In Windows 2000, select the Start menu -> Settings -> Printers.The Printers window (Windows Vista, Windows 2000) or Printers and Faxes window (Windows XP)is displayed.3. Click the icon for the model name of printer to be sharedIn Windows Vista, press the Alt key on your keyboard and then select Run as administrator ->Sharing... from the displayed File menu.In Windows XP or Windows 2000, select Sharing... from the File menu.NoteWindows XP may display a message recommending the user to use the Network SetupWizard to set up sharing.When this message appears, choose not to use the wizard and then set up sharing.4. Set sharingSelect Share this printer (Windows Vista, Windows XP) or Shared as (Windows 2000) on theSharing tab to set a shared name as desired, and click OK.ImportantIn Windows Vista, a confirmation/warning dialog box may appear when installing, uninstalling,or starting software.This dialog box appears when administrative rights are required to perform a task.If you are logged on to an administrator account, click Continue or Allow to continue.Some applications require an administrator account to continue. If you are logged on to astandard account, switch to an administrator account, and restart the operation from thebeginning.This completes the setup on the print server system. Next, set up the client systems.Page topСтр. 359 из 366 стр.Settings on Print Server