Canon iP3600 SERIES On-screen Manual

Contents

Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Changing the PrinterOperation ModeChanging the Printer Operation ModeThis function allows you to switch between various modes of printer operation.The procedure for changing the printer settings is as follows:Custom Settings1. Open the printer driver setup window2. Make sure that the printer is on, and then click Custom Settings on the MaintenancetabThe Custom Settings dialog box opens.NoteIf the printer is off or bi-directional communication is disabled, a message may appearbecause the computer cannot collect the printer status.If this happens, click OK to display the most recent settings specified on your computer.3. If necessary, complete the following settings:Prevent paper abrasionThe printer can increase the gap between the print head and the paper during high-density printingto prevent paper abrasion.Check this check box to use this function.Ink Drying Wait TimeYou can set the length of the printer rest time until printing of the next page begins. Moving the sliderto the right increases the pause time and moving the slider to the left decreases the time.If the paper gets stained because the next page is ejected before the ink on the printed page dries,increase the ink drying wait time.Reducing the ink drying wait time speeds up printing.4. Transmit the settingsClick Send. When the confirmation message appears, click OK.The printer runs in the changed mode hereafter.Page topСтр. 292 из 366 стр.Changing the Printer Operation Mode