Note• If a sheet is loaded when you change the paper source to a roll, "Eject sheet?" is displayed. Press theOK button and remove the sheet.• You cannot switch the paper source in the following situations:• When the Message lamp is flashingCheck the message on the Display Screen and take action as necessary. (See "Error Messag-es →P.821 .")• When the Data lamp is flashingSelect the paper source after printing is finished.• When a printer menu operation is in progressWait until the operation is finished before selecting the paper source.• When in the process of loading paperFinish loading the paper before selecting the paper source.• When in the process of replacing Ink TankFinish replacing the Ink Tank before selecting the paper source.• When the Top Cover is openClose the Top Cover before selecting the paper source.Selecting the Paper Type (Roll)When changing the type of paper after the paper has been advanced, specify the type of paper as follows.Important• For best printing results, the printer fine-tunes the feed amount for each type of paper. Be sure to selectthe type of paper to use correctly before printing.• Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of printedimages may vary depending on the type of paper used. If margins and the size of images are not as youexpected, adjust the paper feed amount and Printhead height.(See "Adjusting the Feed Amount.") →P.635(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).") →P.633Note• After you load the roll, the printer automatically shows a menu for selection of the paper type on theDisplay Screen, unless a barcode has been printed on the roll or you have activated automatic monitoringof the remaining roll paper. Select the type of paper, and then press the OK button.If no barcode has been printed on the roll and you have activated automatic monitoring of the remainingroll paper, specify the roll length after the paper type. (See "Specifying the Paper Length (Roll).")→P.5961. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Media Menu, and then press the ▶ button.Handling Paper > Handling rolls >iPF825 Selecting the Paper Type (Roll)7595
