Roll x is empty. (x is 1 (Upper) or 2 (Lower))"Lift the release lever and replace the roll."Cause Corrective ActionThe roll is empty. Follow these steps to replace the used roll with a newroll of the same type and size.1. Lift the Release Lever and remove the roll.(See "Removing the Roll from the Printer.")→P.597(See "Removing the Roll Holder from Rolls.")→P.6012. Load the new roll.(See "Attaching the Roll Holder to Rolls.")→P.584(See "Loading Rolls in the Printer.") →P.5883. If no barcode was printed on the roll, specify thetype of paper.(See "Selecting the Paper Type (Roll).")→P.5954. If no barcode was printed on the roll, specify thepaper length.(See "Specifying the Paper Length (Roll).")→P.5965. If "Not finished printing. Finish printing remain-ing jobs?" is shown on the Display Screen, pressthe OK button.Printing will resume, starting from the page onwhich the error occurred.There is remaining roll paper, but because it could not beadvanced, it could not be detected.Choose a higher level of Print Quality in the Ad-vanced Settings of the printer driver and try printingagain.(See "Giving Priority to Particular Graphic Elementsand Colors for Printing.") →P.53Error Message > Messages regarding paper >Roll x is empty. (x is 1 (Upper) or 2 (Lower)) iPF82513828
