Banding Adjustment During Printing (Fine Band Adj.)If, during printing, the contrast is uneven sideways across the paper or banding in different colors appears at 50 mm (2in.) intervals, try adjusting the feed amount as follows. The results of adjustment are applied to printing in progress,enabling you to check the results immediately. However, note that because printing is paused, colors may be slightlydifferent.Use Fine Band Adj. after Auto Band Adj. or Manual Band Adj if finer adjustment is required. (See "Auto BandAdjustment (Auto Band Adj.).") →P.636 (See "Manual Band Adjustment (Manual Band Adj).") →P.637Note• The Fine Band Adj. value is reset to 0 if you use Auto Band Adj. or Manual Band Adj.Execute Fine Band Adj. during printing as follows.1. Press the Online button to pause printing.2. Press the Menu button to display the menu during printing. (See "Main Menu Settings (During Printing).")→P.6903. Press ▲ or ▼ to select Menu Durng Prtng, and then press the OK button.4. Press ▲ or ▼ to select Fine Band Adj., and then press the ▶ button.5. Press ▲ or ▼ to change the value, and then press the OK button.Note• The supported range is –5 to +5.Adjustments for Better Print Quality > Adjusting the feed amount >iPF825 Banding Adjustment During Printing (Fine Band Adj.)8639
