Communications Settings6-126System Manager SettingsIf [Select Days] is selected, press [Next] ➞ select a day of the week ([Sun] to [Sat]) ➞ selecta number ([1] to [5]) ➞ enter the ending times using - (numeric keys). Once you havecompleted making the settings, press [OK].You can store up to five different ending times for the Transfer mode, for each day of theweek.Enter all four digits of the time (including zeros), using 24-hour notation.If you make a mistake when entering the time, press to clear your entry ➞ enter anotherfour digit number.If [Off] is selected, the Transfer mode will not end automatically at a specific date/time.Transfer mode switching can be performed using the Receiving mode from the SpecialFeatures screen. (See "Changing the Reception Mode," on p. 3-19.)IMPORTANTYou cannot set the same time for both the start time and end time.NOTE• You can select [Everyday] for the Forward Start Time, and [Select Days] for the Forward EndTime, and vice versa.• If the end time is set earlier than the start time, the time is set as follows, for example:Start time: 22:00, end time: 21:00; The end time refers to 21:00 of the following day.• The default setting is 'Off'.7 Press [Done].The selected modes are set.Examples: 7:05 a.m. ➞ 070511:18 p.m. ➞ 2318