Handling sheets for paper feed slotsLoading Sheets ManuallyWhen using the tray, load the paper in the Top Paper Feed Slot. (→P.183) However, if you have speciedPOP Board, insert the sheet in the Front Paper Feed Slot. (→P.186)Loading paper in the Top Paper Feed SlotNote• You can load only one sheet in the Top Paper Feed Slot. Do not load more than one sheet at a time.This may cause paper jams.• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.• Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.• Load the paper straight. Loading paper askew will cause an error.• Before feeding paper or printing, make sure the sheet is at against the Paper Tray Cover . The sheetmay jam if it curls before feeding or printing and the trailing edge drops toward the front.• If a roll is loaded, rewind the roll before this procedure. (→P.146)1. If you send a print job specifying a paper other than POP Board from a computer beforehand,the type and size of paper are shown on the Display Screen.Note• If you will load paper before sending a print job, press the Feeder Selection button to illuminate thePaper Tray lamp. A screen is displayed for selection of the paper type. Press ◄ or ► to select thepaper type, and then press the OK button. Next, a screen is displayed for selection of the paper size.Press ◄ or ► to select the size of paper, and then press the OK button.• For details on paper types, see the Paper Reference Guide. (→P.107) By factory default, PlainPaper is selected.• Be sure to select the correct paper type. If this setting does not match the loaded paper, it maycause feed errors and affect the printing quality.2. Open the Paper Tray Cover.Handling Paper 183
