Printer SpecicationsPrinter SpecicationsSpecicationsImportant• This information is subject to change as the printer is updated.• The following values may vary depending on the operating environment.PrinterPower supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)In operation 100 W max.Sleep mode 100-120 V: 5 W max.(8 W max. when an IEEE 1394 (FireWire) expansion board isinstalled.)220-240 V: 6 W max.(9 W max. when an IEEE 1394 (FireWire) expansion board isinstalled.)Power consumptionOff 1 W max. (*1)Operating noise Approx. 51 dB (A) max.Temperature 15-30°C (59-86°F)Operatingenvironment Humidity 10-80%, non-condensingDimensions (W × D × H) 999×810×344 mm (39.3×31.9×13.5 in)Weight(not including the Printhead and Ink Tank )49 kg (108.0 lb)Space required for installation (*2) 1,299×1,910×644 mm (51.1×75.2×25.4 in)Applicable standards International Energy Star Program, Law on Promoting GreenPurchasing, GPN, RoHS, The Eco Declaration, WEEE, U.S.presidential directives*1: The printer uses a trace amount of power even when turned off. To stop all power consumption,turn off the printer and unplug the power cord.*2: Normally, you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer, 300mm (11.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (11.8 in) above the printer. Onlywhen printing from the Front Paper Feed Slot, leave 800 mm (31.5 in) of unobstructed space in frontof the printer and 400 mm (15.7 in) behind it.72 Printer Parts
