Control PanelMain Menu SettingsMain menu items are described in the following tables.For instructions on selecting or setting menu items, see “Main Menu Operations”. (→P.30)For details on menu levels and values, see “Menu Structure”. (→P.32)Setting Item Description, InstructionsPaper Cut Displayed if a roll is loaded.Choose Yes to cut the roll at the current position. The paper will be fed, ifnecessary, so that the sheet is at least 10 cm long after the cut. The paper willnot be cut if there is not enough paper left to feed the paper this much.Head Cleaning Printhead cleaning options. (→P.652)Choose Head Cleaning A if printing is faint, oddly colored, or contains foreignsubstances.Choose Head Cleaning B if no ink is printed at all, or if printing is not improvedby Head Cleaning A .Paper Settings Specify the type and size of paper. (→P.48)Med.Detail Set. Specify detailed paper-related settings, including the ink drying time andborderless printing options. (→P.49)Adjust Printer Adjust the Printhead alignment or amount of feed by printing a test pattern.(→P.51)Interface Setup Congure the network settings. (→P.53)Maintenance Replace the Printhead , prepare to transfer the printer, and clean the Pick UpRoller . (→P.54)System Setup Specify the printer system settings, including the date format and displaylanguage. (→P.55)Test Print Choose Yes in Status Print to print information about the printer.Choose Yes in Media Details to print the paper settings as specied inMed.Detail Set.Choose Yes in Print Job Log to print a record of print jobs, including the papertype and size, amount of ink used, and so on.Choose Yes in Menu Map to print a list of the main menu options.Choose Yes in Nozzle Check to print a test pattern for checking the nozzles.If you have selected a leading edge margin of 20mm in Nr End Sht Mrgn inthe printer menu, the test print sheet may not be printed completely.Information Displays the information about the printer and history of print jobs. (→P.57)Printer Parts 47
