Problems with the printing qualityImmediately After Borderless Printing, the Trailing EdgeMargin is Soiled During Regular PrintingCause Corrective ActionDepending on your printing environment, afterborderless printing in which the leading and trailingedge of the roll is cut automatically, any ink adheringto the cutter unit may rub off on the next printeddocument.Follow these steps to set the Between Pages settingof Drying Time in a range of 30 seconds to 3 minutesbefore borderless printing.1.On the Main sheet of the printer driver, clickSettings in Media Type .2.Select the ink drying time in the Between Pageslist of Drying Time .Roller marks are left across the trailing edge of paperCause Corrective ActionFollowing the instructions, press the ▲ button,remove the paper, and then press the ▼ button.A document was removed after printing from theFront Paper Feed Slot without pressing the ▲ button.Wipe away any soiling on the rollers. (→P.670)(→P.673)Line thickness is not uniform (Windows)Cause Corrective ActionIn the Special Settings dialog box of the Windowsprinter driver, Fast Graphic Process is selected.Open the printer driver’s Properties dialog box fromPrint in the application software’s File menu, and tryprinting following the steps below.1.Remove the check from Open Preview WhenPrint Job Starts in the Main sheet.2.Remove the check from Page Layout in theLayout sheet.3.Click the Special Settings button in the Layoutsheet to open the Special Settings dialogbox, and remove the check from Fast GraphicProcess .Troubleshooting 705
