Adjusting the feed amountAdjusting Color on the Trailing Edge of SheetsIf printed sheets are affected by banding in different colors toward the end of the sheet (about 20-30 mm fromthe edge), try adjusting the feed amount of the trailing edge of sheets.Follow these steps for standard automatic adjustment of the feed amount.Note• If printed documents (including documents printed on rolls) are affected by banding in different colorsnot only toward the end of the sheet but throughout the printed area, try adjusting the overall feedamount. (→P.619)• This adjustment is only possible when feeding paper from the Cassette or Top Paper Feed Slot that canbe set up with a margin on the trailing edge of 3 mm (0.12 in). If you use paper for which you cannotspecify a trailing margin of 3 mm, it will be automatically ejected, and adjustment is not possible.1. Load a sheet of unused paper A4/Letter-sized or larger.Note• Always make sure the loaded paper matches the media type setting on the printer. Adjustmentcannot be completed correctly unless the setting value matches the loaded paper.• We recommend using the type of paper you use most often for adjustment.2. Press the Menu button to display MAIN MENU.3. Press ◄ or ► to select Adjust Printer, and then press the ▼ button.4. Press ◄ or ► to select Adj Far Ed Feed, and then press the ▼ button.5. Press ◄ or ► to select Yes, and then press the OK button.A test pattern is printed for adjustment.C1 is displayed on the Control Panel.626 Maintenance
