Frequently Asked QuestionsTroubleshootingFrequently Asked QuestionsFrequently Asked QuestionsThis section presents frequently asked questions and answers. To view more detailed explanations, click thehyperlinks in the answer column.Question AnswerHow do I print on a roll? When printing on rolls, after loading the roll, specifythe paper type and length, both on the Control Paneland in the printer driver.⇒Loading and Printing on Rolls (→P.82)How do I print manually? When printing manually, specify the paper type andsize in the printer driver, and then load the paper.⇒Loading and Printing on Sheets in the Paper FeedSlot (→P.86)How do I print on sheets in the cassette? When printing from the cassette, load the paper, andthen complete the printer driver settings for the papertype and size.⇒Loading and Printing on Sheets in the Cassette(→P.80)How do I switch between printing on a roll andprinting manually?You can switch between manual and auto paper feedmethods by pressing the Feeder Selection button.⇒Selecting the Roll as the Paper Source (→P.114)⇒Selecting the Tray as the Paper Source (→P.155)⇒Selecting the Cassette as the Paper Source(→P.154)How do I change the paper type or size? Specify the type and size of paper, both on theControl Panel and in the printer driver.• Specifying it in the Printer Driver⇒Specifying Paper in the Printer Driver (→P.688)• Specifying it on the Control PanelSelecting the paper type⇒Selecting the Paper Type (Roll) (→P.124)⇒Selecting the Paper Type (Tray) (→P.168)⇒Selecting the Paper Type (Cassette) (→P.167)Selecting the Paper Size⇒Specifying the Paper Length (Roll) (→P.125)⇒Selecting the Paper Size (Tray) (→P.193)⇒Selecting the Paper Size (Cassette) (→P.170)How do I cut the roll paper after printing? You can wait until ink dries before cutting the roll, andyou can cut rolls at a desired position.⇒Specifying the Cutting Method for Rolls (→P.130)686 Troubleshooting
