Adjusting the feed amountFollow these steps to change the Feed Priority setting.1. Press the Menu button to display MAIN MENU.2. Press ◄ or ► to select Med.Detail Set., and then press the ▼ button.3. Press ◄ or ► to select the type of paper, and then press the ▼ button.4. Press ◄ or ► to select Feed Priority, and then press the ▼ button.5. Press ◄ or ► to select the level of suction against paper on the Band Joint, and then pressthe OK button.The setting is updated, and an equals sign “=” is displayed at left.Follow the steps below to adjust the feed amount automatically.1. Prepare one unused sheet A4/Letter-sized or larger when Standard Adj. is selected or twowhen Advanced Adj. is selected.When using a roll, load an unused roll 10 inches (254 mm) or wider.• Loading Rolls on the Roll Paper Holder (→P.115)• Loading Rolls in the Roll Feed Unit (→P.118)• Loading Sheets in the Cassette (→P.156)• Loading Sheets Manually (→P.159)Note• Always specify the paper type when loading paper. Using paper that you have not specied on theprinter may cause feeding problems and affect the printing quality.• We recommend using the type of paper you use most often for feed amount adjustment.2. Press the Menu button to display MAIN MENU.3. Press ◄ or ► to select Adjust Printer, and then press ▼.MAIN MENUAdjust Printer ↓4. Press ◄ or ► to select Auto Band Adj., and then press ▼.Adjust PrinterAuto Band Adj. ↓5. Press ◄ or ► to select Standard Adj., and then press ▼.Auto Band Adj.Standard Adj. ↓616 Maintenance
