NetWare Print Service Settings 4-54Using a NetWare Network (Windows)4 If you are using the remote printer mode, start the print server. If you are using the NetWare file server as a print server, enter “LoadPSERVER.NLM” in the file server, and then press the [Enter] key.NOTE• If you are using the queue server mode, this step is not required.NetWare print service settings are completed. Proceed to “Protocol Settings,” on p. 4-8.Using PCONSOLE in the Queue Server Mode or Remote Printer Modein the Bindery Mode (NetWare 3.2)1 Log on to NetWare as the Supervisor, and then startPCONSOLE.2 If you have not set up a print server yet, set up the printserver. On the [Available Options] menu, select [Print Server Information], and thenpress the [Enter] key. Press the [Insert] key. Enter the name of the print server you are setting up, and then press the[Enter] key. Press the [Esc] key to return to the [Available Options] menu.NOTE• Be sure to remember the name of the print server. You need it to specify theprinter’s protocol settings.3 Set up a Queue, and then assign the print server to the queue. On the [Available Options] menu, select [Print Queue Information], and thenpress the [Enter] key. Press the [Insert] key. Enter the name of the queue you are setting up, and then press the [Enter] key. Select the name of the queue you specified, and then press the [Enter] key. Select [Queue Servers], and then press the [Enter] key. Press the [Insert] key. Select the print server you set up in step 2, and then press the [Enter] key. Press the [Esc] key until you return to the [Available Options] menu.
