Canon imageRUNNER 105 Network Manual

Also see for imageRUNNER 105: Media guide Function guide Brochure & specs

Contents

Protocol Settings 3-253Using a TCP/IP Network (Windows/ UNIX/Macintosh)10 Restart the machine. Turn OFF the machine, wait at least three seconds, and then turn it ON again.The e-mail/I-fax settings are completed.Startup Time SettingsWhen you connect the machine to a switching hub, it may not be able to connect toa network even though your network settings are set correctly.This occurs because the spanning tree process performed between switching hubsprevents them from communicating with each other immediately after the machineconnects to a switching hub.In this case, use the following procedure to delay the start of communication.1 Press (Additional Functions) on the control panel, andthen press [System Settings] → [Network Settings] on thetouch panel display.Press [] → [Startup Time Settings].Sample screen for imageRUNNER 3300i