TCP/IP Network Setup Operating Procedures3-2Using a TCP/IP Network (Windows/ UNIX/Macintosh)3TCP/IP Network Setup Operating ProceduresTo use a TCP/IP network, it is necessary to perform the following procedure.IMPORTANT• It is recommended that the network manager perform steps 1 and 3 above.• This printer does not come with printer driver software that can be used on the UNIXplatform.• To print from a Macintosh, see “Chapter 6 Using an AppleTalk Network (Macintosh).”• Use the control panel or NetSpot when configuring the protocol settings for the first time.After configuring protocol settings, you can change their content by using a web browser(Remote UI).1 Protocol Settings (See “Protocol Settings,” on p.3-3)Specify the protocol settings. Use any of the following to specify the settings.• Control panel• NetSpot• Web browser (Remote UI)2 Computer Settings for Printing (See “Setting Up a Computer for Printing(Windows/UNIX),” on p.3-27)Specify the settings for each computer you use for printing.3 Computer Settings for a File Server (See “Setting Up a Computer as a FileServer,” on p.3-43)Specify the settings of the computer receiving data sent from the machine.
