This switch is used to judge whether or not initialization has been performed for the "Setup Guide", "FTP print", "DCM support","remote access protection support", and "DFU support" screens."0" means that the setting values are not initialized."1" means that the setting values are initialized.● SW19List of functionsBit Function 1 00 Setting for enabling/disabling DFUfunctionOFF (Initial value) ON1 - -2 - -3 - -4 - -5 - -6 - -7 - -Details of [Bit 0]Whether to enable the DFU function that realizes upgrading of system software in conjunction with iW EMC/MC DFU Plug-in canbe selected.When "0" is selected, the function is disabled. (Default)When "1" is selected, the function is enabled.● SW20List of functionsBit Function 1 0Bit 0 - - -Bit 1 - - -Bit 2 - - -Bit 3 - - -Bit 4 - - -Bit 5 Setting of display/hide of FTP print Displayed Not dis-playedBit 6 FTP print initialization judgment flag Not initial-izedInitializedBit 7 - - -Details of [Bit 5]Whether or not to display FTP print can be set.Hidden when "0" is set (default)Displayed when "1" is setDetails of [Bit 6]FTP print initialization judgment flag"0" means that the setting values are not initialized."1" means that the setting values are initialized.■ Details of numeric parameterNo. Function Setting range10 Set the reboot time monitoring time for 2 a.m. reset (at power-on). (Unit: time) 0 to 9999 (Default: 6)15 Set the shift timer from energy saver mode to sleep. (Unit: second) 0 to 9999 (Default: 5)16 Set the cool down timer. (Unit: second) 0 to 9999 (Default: 5)19 Set the sleep 2 shift timer. (Unit: second) 0 to 9999 (Default: 5)20 Set display/hide of Setup Guide (other settings). 0: Display, 1: Hide (Default: 0)24 Set the print-related warning (no paper) alert wait timer. (Unit: second) 0 to 9999 (Default: 20)8. Service Mode276
