There is no function to display the license registration numbers in the main unit.Therefore, when there is a possibility to restore the license after erasing it, make sure that a user has written down the licenseregistration number.When a license option is displayed in Procedure (4), 001 1 is displayed.The last "1" shows that the license is validated by license authentication.After the license is erased, the last number is changed to "2".When the option is standard, the last number shows "3" which means disable for license transfer.Details about the last number:1. The function is validated.2. The function is invalidated, or a license is transferred.3. The function is invalidated, or the license does not exist.#E-RDS■ ConfigurationSettings related to e-RDS are described below.Item Default Setting range DescriptionE-RDS SWITCH 0 0 or 1 e-RDS OFF/ON setting (0:OFF / 1:ON)When used (ON), the counter infor-mation and error information are sent to UGW.Default: 0 (OFF)RGW- AD-DRESSURL of UGW Character string length:129byte (includingNULL, one-byte codesonly)URL of UGWDefault: URL of actual UGWCharacter string length: 129 bytes(including NULL, one-byte codes only)RGW-PORT 443 1-65535 Port No. of UGW Default: 443Setting range: 1 to 65535CNT-DATE Setting of the date of sending the counter information to the server (Validafter input of license).Set the start date of the schedule to send the counter information to theserver using a third party expansion function of E-RDS.Refer to the user mode date setting.(12 digits: YYYYMMDDHHMM)YYYY: Year MM: MonthDD: DayHH: HourMM: MinuteCNT-INTV 24 1-168 (on a weekly ba-sis)Setting of the interval of sending the counter information to the server (Validafter input of license).Set the interval of sending the counter information to the server using a thirdparty expansion function of E-RDS.COM-TEST Execution of communication test An attempt is made to connect to UGW,judges whether connection is successful, and displays "COM- TEST OK" or"COMTEST NG" as the judgment result.COM-LOG Details of communication test result. The log of errors in communication withUGW is displayed. The error information includes the error occurrence time,error code, and details of the error.Maximum log count: 5Error informationlength: Max. 128 characters (excluding NULL)SCALLCMP Repair completion process (call button function) Used when the servicepersonnel has completed the requested repair.#REPORT■ ConfigurationThe table below lists the kinds of reports that are supported.8. Service Mode284
