Keypad Baud rate0 3429baud1 3200baud2 3000baud3 2800baud4 2743baud5 2400baudLeft/right arrow key Transmission speed<>2400bps4800bps7200bps9600bps12000bps14400bps16800bps19200bps21600bps24000bps26400bps28800bps31200bps33600bps● FUNCTION Test <(6) FUNCTION TEST>Press the numeric keypad key 6 on the test mode menu to select the function test.Press numeric keypad keys 1 to 4 and 9 during the function test to enter the menus listed below.Keypad Type Description1 G3 signal transmission test Transmits 4800-bps G3 signals to a telephone line and speaker2 Sensor test Sensor actuation test3 Accessory4 ADF test ADF operation test5 Not used6 Not used7 Not used8 Not used9 Line signal reception test NCU board signal sensor and frequency counter operation testG3 signal transmission test (6-1: G3 480 bps Tx)Press numeric keypad key 1 on the FUNCTION TEST menu to select the G3 signal transmission test.This test transmits 4800-bps G3 signals from the telephone line connection terminal and speaker.Sensor test (6-2: SENSOR)This mode is used to verify the status of the unit sensors from the touch panel (LCD) indications.Press numeric keypad key 3 on the FUNCTION TEST menu to select the sensor test.To select a minor item, press the START key.The touch panel (LCD) indications change as the associated sensors turn on and off.Group Item Description Detail(2) SENS/ SWCHECKFLAG Sensor check with flag(manual check)CT: Waste Toner Full Sensor(S17) 0/Full1/AvailableTC: Toner Cover Open/Closed Sensor (S16) 1/Cover open0/Cover closedMW: Manual Feeder Paper Size Sensor (S8) 0/Document presence1/Document absenc8. Service Mode298
