Dahua DHI-ARC3008C User Manual
Also see for ARC3008C: Installer manual
                                                  | |
Contents
| 
Alarm Control Panel User Manual12Key FunctionIncrease or decrease numbers.Switch options on the interface.Page turning.Enter the sub menu.Switch to the next menu of the same level in editing mode.Confirm the input.Arm the whole Area.Rapid Total Arming to the whole Area.Give combination operations. For details, see Table 2-3.Arm the PARTITION 1.Rapid Arming the PARTITION 1.Give combination operations. For details, see Table 2-3.Arm the PARTITION 2.Rapid Arming the PARTITION 2.Give combination operations. For details, see Table 2-3.Disarm.Move the pointer to the right when you edit number or letter.2.3.3 Key Combination OperationsHow to press key combination: Press in sequence.For example, if you need to press + 0, press first, and then press 0.Table 2-3 Key combinationsKey Function+ 0 (F0)On the main interface, press + 0 (F0) to show the GSM andwireless signal strength. The GSM signal is shown with eight bars, andthe wireless signal is shown with four bars.Press + 0 (F0) again to return to the main interface. Withoutpressing + 0 (F0), the system automatically returns to the maininterface in 2 min.+ 1 (F1)Panic Activation (silent activation or with sirens and Keypad buzzer)On the menu of ZONE TROUBLES, ZONE MANAGER, and CHIMEZONES, press + 1 (F1) to show the Area selection interfacewhere can select the Areas within which to do the searching andfiltering.On the OUTPUTS menu, press + 1 (F1) to do a test to theoutput circuit, and Active is shown. |
Related manuals for Dahua ARC3008C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine