Dahua DHI-ARC3008C User Manual
Also see for ARC3008C: Installer manual
                                                  | |
Contents
| 
Alarm Control Panel User Manual244 User MenuThis Chapter describes the operations included in the User Menu.The User Menu consists of many menus for management and programming operations as below: ZONE TROUBLES SYSTEM TROUBLES ZONES MANAGER LOGBOOK EVENT CHIME ZONES ACCESS CODES TECHNICIAN FIRMWARE VERSION WALK TEST SYSTEM TIMERS DATE/TIME HOLIDAY TEL NUMBERS REMOTE SERVICE SECURITY CODETo enter the User Menu, you need an access code. So the User Menu is accessible from the codes thathave an appropriate security level. The factory default user code is 1234 that is also the user code ofSupervisor user with the highest authority.It is possible to scroll through the menus by the up and down arrow keys, or to go directly to the requiredmenu by pressing the number of the menu + .To exit from the User Menu, press until the Keypad requests "EXIT FROM MENU?", then pressto confirm or press again to cancel.ZONE TROUBLES4.1The ZONE TROUBLES menu examines which Zones are in NOT READY status and the reason for thefault, and then judge if it is necessary to close it or bypass it.Type in the access code, and then press .Step 1The ZONE TROUBLES menu is shown on the LCD display. See Figure 4-1.Zone troublesFigure 4-1Press to enter the menu.Step 2 |
Related manuals for Dahua ARC3008C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine