Dahua DHI-ARC3008C User Manual
Also see for ARC3008C: Installer manual
                                                  | |
Contents
| 
Alarm Control Panel User Manual29The CHIME ZONES menu activates CHIME mode for an individual Zone. In any case, only the Zonesdefined by the TECHNICIAN as CHIME Zones can be activated in the CHIME mode.Type in the access code, and then press .Step 1The ZONE TROUBLE menu is shown on the LCD display (Figure 4-1).Press and to scroll up and down until you reach the CHIME ZONES menu, and thenStep 2press . If the TECHNICIAN did not program any Zone with CHIME mode, the interface shows "NOFOUND." If the TECHNICIAN programmed the Zone with CHIME mode, continue the operations.Press and to select YES or NO.Step 3Press to confirm the setting, and then press to return to the CHIME ZONES menu.Step 4Then you can press and to move to the next menu or press to exit from the UserMenu. Repeat the previous steps to set CHIME mode for other Zones if needed. If there are many Zones that you want to set CHIME mode, you can set a search filter byAREA and ACTIVATION STATUS. For details, see "4.1 ZONE TROUBLES."ACCESS CODES4.6The ACCESS CODES menu allows you to customize the user codes for accessing the Control Panel. Eachuser is assigned with a code that is linked with an Authority level. Users with high authority can do most ofoperations in the system, and those with low authority are restricted to some operations.4.6.1 Authority LevelTable 4-3 Authority levelUser type Authority levelSupervisor All operations on all Areas. Factory default setting is 1234.ManagerAll operations on the Areas allowed by the Keypad. The Manager canchange his own code and those of a lower level, but cannot change theSupervisor code.MasterOperations only on the Areas that are assigned to Master. The Master canonly change his own code and those of a lower level and access the UserMenu up to option 9.User Operations only on the Areas that are assigned to User. The User can onlychange his own code and access the User Menu up to option 9.Temporary Valid only for an arming and disarming operation. The Temporary does nothave access to the User Menu. |
Related manuals for Dahua ARC3008C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine