Dahua DHI-ARC3008C User Manual
Also see for ARC3008C: Installer manual
                                                  | |
Contents
| 
Alarm Control Panel User Manual402) After selecting a telephone number, press to enter the programming mode.3) Configure the SMS number settings. See Table 4-8.Table 4-8 SMS number settingSubmenu SettingSTATE ACTIVE: Allow the text SMS to be sent and received.ISOLATE: Do not allow the text SMS to be sent and received.SYSTEM Press 1 to 7 to select the corresponding week days to send the systemstatus message to this SMS number.CREDIT Press 1 to 7 to select the corresponding week days to send the balanceinformation of the SIM card that is installed in the Control Panel.SMS TIME Type in the specific time for SYSTEM and CREDIT.AREA Press 1 to 8 to select the alarm event from which Area can be sent to thisSMS number.EVENTPress 1 to 5 to select which event can be sent to this SMS number.1: S-system event2: M-module3: E-Emergency4: I-Arm/Disarm5: Z-Zones4) After completing the settings, press until returns to the start of SMS NUM submenu. SIM NUMRecord the SIM card number that is installed in the Control Panel.Press to return to the TEL NUMBER menu.Step 5Then you can press and to move to the next menu or press to exit from the UserMenu.REMOTE SERVICE4.14The REMOTE SERVICE menu gives possibility to activate the alarm Control Panel remotely by telephonefrom the control center of your Installer.Type in the access code, and then press .Step 1The ZONE TROUBLE menu is shown on the LCD display (Figure 4-1).Press and to scroll up and down until you reach the REMOTE SERVICE menu, seeStep 2Figure 4-17.Remote serviceFigure 4-17 |
Related manuals for Dahua ARC3008C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine