Dahua DHI-ARC3008C User Manual
Also see for ARC3008C: Installer manual
                                                  | |
Contents
| 
Alarm Control Panel User Manual23Disarming3.2When you disarm the system, all the connected detectors are deactivated.The system has the types of arming as below: Total Disarming Disarming through Timer Disarming through Telephone or SMS text Disarming under Duress3.2.1 Total Disarming from the KeypadYou can do the disarming where there is an alarm or you just want to disarm.Type in the user code on the Keypad.Step 1Press .Step 2The Area that can be disarmed is shown on the LCD display.Press the corresponding key on the Keypad to the Area that you want to disarm.Step 3Press to disarm the Area totally.Step 43.2.2 Total Disarming with the TimerYou can disarm the alarm system by timer that is set on the SYSTEM TIMER menu.This setting can be managed and programed by the TECHNICIAN and Supervisor user. For details, see"4.10 SYSTEM TIMERS" menu.The system also supports programming HOLIDAYS during which the TIMER will not have any effect. Fordetails, see "4.12 HOLIDAY" menu.3.2.3 Total Disarming through Telephone or SMSThe alarm system can also be disarmed from telephone through a specific procedure with an interactivevocal guide or through SMS text messages.3.2.4 Disarming under DuressYou can do the disarming with a changed use code or a specific duress code to give an duress alarm. Takethe normal use code is 1234 as an example. You can increase or decrease the last figure.Type in the changed user code, for example, 1235.Step 1Press .Step 2The Area that can be disarmed is shown on the LCD display.Press the corresponding key on the Keypad to the Area that you want to disarm.Step 3Press to disarm the Area totally.Step 4 |
Related manuals for Dahua ARC3008C
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine