6 Piranha4 2K and 4K Camera Color User's Manual03-032-20180-06System PrecautionsPrecautionsRead these precautions and this manual carefully before using the camera.Confirm that the camera’s packaging is undamaged before opening it. If the packaging is damaged pleasecontact the relevant logistics personnel.Do not open the housing of the camera. The warranty is voided if the housing is opened.Keep the camera housing temperature in a range of 0 °C to +65 °C during operation.Do not operate the camera in the vicinity of strong electromagnetic fields. In addition, avoid electrostaticcharging, violent vibration, and excess moisture.To clean the device, avoid electrostatic charging by using a dry, clean absorbent cotton cloth dampenedwith a small quantity of pure alcohol. Do not use methylated alcohol. To clean the surface of the camerahousing, use a soft, dry cloth. To remove severe stains use a soft cloth dampened with a small quantity ofneutral detergent and then wipe dry. Do not use volatile solvents such as benzene and thinners, as theycan damage the surface finish. Further cleaning instructions are below.Though this camera supports hot plugging, it is recommended that you power down and disconnectpower to the camera before you add or replace system components.Electrostatic discharge and the CMOS sensorImage sensors and the camera bodies housing are susceptible to damage from electrostatic discharge(ESD). Electrostatic charge introduced to the sensor window surface can induce charge buildup on theunderside of the window that cannot be readily dissipated by the dry nitrogen gas in the sensor packagecavity. The charge normally dissipates within 24 hours and the sensor returns to normal operation.Additional information on cleaning the sensor window and protecting it against dust, oil, blemishes, andscratches can be found here: Appendix D: The Sensor Window.
