Dalsa Piranha4 Series Manual

Also see for Piranha4 Series: Manual User manual User manual User manual User manual

Contents

Dalsa Piranha4 Series Manual Manual pdf 82 page image

82 Piranha4 2K and 4K Camera Color User's Manual03-032-20180-06 Teledyne DALSACamera control feature descriptionsThe following table describes these parameters along with their view attribute and minimum camerafirmware version required. Additionally the firmware column will indicate which parameter is amember of the DALSA Features Naming Convention (DFNC), versus the GenICam Standard FeaturesNaming Convention (SFNC not shown).The Device Version number represents the camera software functional group, not a firmware revisionnumber.Display Name Feature Description DeviceVersion& ViewSensor ColorTypesensorColorType Defines the camera sensor color type. (RO) 1.00DFNCBeginnerCFA_RGB Sensor color type is RGBInternal LineRateAcquisitionLineRate Specifies the camera internal line rate, in Hzwhen Trigger mode set to internal.Note that any user entered value is automaticallyadjusted to a valid camera value.1.00BeginnerMeasured LineRatemeasureLineRate Specifies the line rate provided to the camera byeither internal or external source (RO)1.00BeginnerRefreshmeasured lineraterefreshMeasureLineRate Press to show the current line rate provided tothe camera by either internal or external sources1.00BeginnerExposure TimeSourceExposureMode Sets the operation mode for the camera’sexposure (or shutter). (RO)1.00BeginnerTimedTrigger WidthTimedTriggerWidthThe exposure duration time is set using theExposure Time feature and the exposure startswith a LineStart event.Uses the width of the trigger signal pulse tocontrol the exposure duration.Exposure TimeSelectorexposureTimeSelectorAllRedGreenBlueMonoSelects which color that the exposure time valueis to apply to.Exposure time setting applies to all colors.Exposure time setting applies to red.Exposure time setting applies to green.Exposure time setting applies to blue.Exposure time setting applies to mono.1.00BeginnerExposure Time ExposureTime Sets the exposure time (in microseconds) whenthe Exposure Mode feature is set to Timed.1.00BeginnerMeasuredExposure TimemeasureExposureTime Specifies the exposure time provided to thecamera by either internal or external source (RO)1.00BeginnerRefreshedmeasuredexposure timerefreshMeasureExposureTime Press to display the current exposure timeprovided to the camera.1.00BeginnerDirectionSourcesensorScanDirectionSourceInternalExternalDirection determined by value ofSensorScanDirectionDirection control determined by value on CC31.00Beginner