Piranha4 2K and 4K Color Camera User's Manual 87Teledyne DALSA 03-032-20180-06Flat Field CategoryThe Flat Field controls, as shown by CamExpert, group parameters used to configure camera pixelformat, and image cropping. Additionally a feature control to select and output an internal test imagesimplifies the process of setting up a camera without a lens.Parameters in gray are read only, either always or due to another parameter being disabled. Parametersin black are user set in CamExpert or programmable via an imaging application.Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or thirdparty software usage—not typically needed by end user applications.Flat field control feature descriptionThe following table describes these parameters along with their view attribute and minimum camerafirmware version required. Additionally the firmware column will indicate which parameter is amember of the DALSA Features Naming Convention (DFNC), versus the GenICam Standard FeaturesNaming Convention (SFNC not shown).The Device Version number represents the camera software functional group, not a firmware revisionnumber.Display Name Feature Description DeviceVersion& ViewMode flatfieldCorrectionMode 1.00Off Off FPN and flat field coefficientsdisabled.Beginner
