4 Handling4.1 Transportl Only by qualified personnel in the manufacturer’s original recyclable packagingl Avoid shocksl Temperature –25 to +70°C (-13...158°F), max. 20K/hr rate of changel Humidity max. 95% relative humidity, no condensationl The servo amplifiers contain electrostatically sensitive components which can be da-maged by incorrect handling. Discharge yourself before touching the servo amplifier.Avoid contact with highly insulating materials (artificial fabrics, plastic films etc.). Placethe servo amplifier on a conductive surface.l If the packaging is damaged, check the unit for visible damage. In this case, inform the shipperand the manufacturer.4.2 Packagingl Cardboard box, can be recycledl Dimensions: SERVOSTAR 601...610 (HxWxD) 125x415x350 mmSERVOSTAR 614 / 620 (HxWxD) 170x415x350 mml Labeling : nameplate outside at the box4.3 Storagel Storage only in the manufacturer’s original recyclable packagingl Max. stacking height 8 cartonsl Storage temperature -25 to +55°C, max. rate of change 20°C / hourl Storage humidity 5 ... 95% relative humidity, no condensationl Storage duration Less than 1 year without restriction.More than 1 year: capacitors must be re-formed before setting up and operating the servo am-plifier. To do this, remove all electrical connections and apply single-phase 230V AC for about30 minutes to the terminals L1 / L2.4.4 MaintenanceThe instruments do not require any maintenance, opening the instruments invalidates the warranty.Cleaning : — if the casing is dirty: clean with Isopropanol or similardo not immerse or spray— if there is dirt inside the unit it must be cleaned by the manufacturer— dirty protective grill on fan must be cleaned with a dry brush4.5 DisposalIn accordance to the WEEE-2002/96/EG-Guidelines we take old devices and accessories back forprofessional disposal, if the transport costs are taken over by the sender. Send the devices to:Danaher Motion GmbHWacholderstr. 40-42D-40489 DüsseldorfSERVOSTAR ® 601...620 Product Manual 13Danaher Motion 07/2007 Handling
