Danaher Motion SERVOSTAR 600 Series manuals
SERVOSTAR 600 Series
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- About this manual
- Abbreviations used
- safety instructions
- Use as directed
- American Directives and Standards
- Approvals
- Packaging
- Nameplate
- Part number scheme
- technical description
- Technical data
- Recommended torque
- Conductor cross-sections
- Control for motor holding brake
- Grounding system
- Switch-on and switch-off behavior
- Behavior in standard operation
- Behavior in the event of an error (with standard setting)
- Stop/Emergency Stop Function to EN 60204
- Emergency Stop: Standards
- Implementation of the Stop Category 0
- Implementation of the Stop Category 1
- Implementation of the Stop Category 2
- Shock-hazard protection
- Isolating transformers
- Important notes
- Assembly
- Dimensions
- electrical installation
- Guide to electrical installation
- Wiring
- Technical data for connecting cables
- Motor connector with shieldplate
- Components of a servo system
- Block diagram
- Pin assignments
- Connection diagram (overview)
- Power supply
- Mains supply connection (X0)
- Motor connection with brake (X9)
- Feedback
- Resolver (X2)
- Sine Encoder 5V with BISS (X1)
- Sine Encoder with EnDat 2.1 or HIPERFACE (X1)
- Sine Encoder without data channel (X1)
- Incremental encoder / sine encoder with Hall (X1)
- Incremental Encoder (X5)
- Electronic Gearing, Master-slave operation
- Connection to a SERVOSTAR master, 5 V signal level (X5)
- Connection to a sine-cosine encoder (X1)
- Connection to a SSI encoder (X5)
- Step/Direction with 5 V signal level (X5)
- Encoder emulations
- SSI output (X5)
- Digital and analog inputs and outputs
- Analog outputs (X3)
- Digital inputs (X3)
- Digital outputs (X3)
- RS232 interface, PC connection (X6)
- CANopen Interface (X6)
- Setup software
- Hardware requirements
- Quickstart Guide
- Minimum Wiring for Drive Test
- Connect
- Important Screen Elements
- Basic Setup
- Motor (synchronous)
- Save Parameters and Restart
- Jogging the Motor (Speed Control)
- Status
- Multi-axis systems
- Example of connections for multi-axis system
- Key operation / LED display
- Standard menu structure
- Error messages
- Warning messages
- Removing faults/warnings
- Safety instructions
- Functional description
- Functional test
- Application example category 1 according to EN954-1
- Application example category 3 according to EN954-1
- Flow chart
- Guide to installation of expansion cards
- Expansion card -I/O-14/08
- Connector assignments
- Connection diagram
- Expansion cards -PROFIBUS
- Expansion card -SERCOS
- Modifying the station address
- Expansion card -DEVICENET
- Combined module/network status-LED
- Bus cable
- Expansion card -ETHERCAT
- Expansion card -SYNQNET
- Digital inputs/outputs, connector X21A (SubD 15-pin, socket)
- Expansion module -2CAN
- Power Supply SINCOS
- Hall Dongle
- Servo amplifiers
- Index
- sales and service
manualsdatabase
Your AI-powered manual search engine