Danaher Motion 05/2008 Appendix G – Regulatory InformationS200-VTS Product Manual 129G.2.1. CE Test SetupAC MODELS S2XX6X-XXX, S2XX5X-XXX12 3456789 1066Example of Test Setup* (cable between filter and drive shielded with shield tied to PE with a 360 degree termination at each end ofthe cable)1) S200 AC DRIVE: S20360-VTS2) MOTOR FEEDBACK CABLE: CF-DA0111N-05-0 (CF-DA0111N-50-0 for conducted emissions)3) MOTOR POWER CABLE: CP-102AAAN-05-0 (CP-102AAAN-50-0 for conducted emissions)4) MOTOR: KOLLMORGEN AKM43K-ANCNC-005) LINE FILTER: MTE RF30006-4 (see * below)6) CORDS FOR AC MAINS CONNECTION7) 5V POWER SUPPLY FOR ENABLE OPTO8) PERSONAL COMPUTER9) SERIAL CABLE (for setup and diagnostics)10) SHIELDED I/O CABLE WITH DSUB SHELL GROUNDED AT EACH ENDG.2.2 CE Test SetupDC MODELS S2XX3X-XXX12 3456789 1066Example of Test Setup1) S200 DC DRIVE: S20630-VTS2) MOTOR FEEDBACK CABLE: CF-DA0111N-05-0 (CF-DA0111N-50-0 for conducted emissions)3) MOTOR POWER CABLE: CP-102AAAN-05-0 (CP-102AAAN-50-0 for conducted emissions)4) MOTOR: KOLLMORGEN AKM43K-ANCNC-005) SAFETY ISOLATED DC BUS POWER SUPPLY6) CORDS FOR AC MAINS CONNECTION7) 5V POWER SUPPLY FOR ENABLE OPTO8) PERSONAL COMPUTER9) SERIAL CABLE (for setup and diagnostics)10) SHIELDED I/O CABLE WITH DSUB SHELL GROUNDED AT EACH END
