Parameters: Operation andDisplay0-0* Operation / DisplayParameters related to the fundamental functionsof the frequency converter, function of the LCPbuttons and configuration of the LCP display.0-0* Basic SettingsParameter group for basic frequency convertersettings.0-01 LanguageValue:English(ENGLISH) [0]German(DEUTSCH) [1]French(FRANCAIS) [2]Danish(DANSK) [3]Spanish(ESPANOL) [4]Italian(ITALIANO) [5]Swedish(SWEDISH) [6]Dutch(DUTCH) [7]Chinese(CHINESE) [10]Finnish(FINNISH) [20]English US(ENGLISH US) [22]Greek(GREEK) [27]Portuguese(PORTUGUESE) [28]Slovenian(SLOVENIAN) [36]Korean(KOREAN) [39]Japanese(JAPANESE) [40]Turkish(TURKISH) [41]Traditional Chinese [42]Bulgarian [43]Serbian [44]Romanian(ROMANIAN) [45]Hungarian(HUNGARIAN) [46]Czech [47]Polish(POLISH) [48]Russian [49]Thai [50]Bahasa Indonesian(BAHASA INDONESIAN) [51]Function:Defines the language to be used in display.The frequency converter can be delivered with 4various language packages. English and Germanare included in all packages. English cannot beerased or manipulated.Language package 1 consists of:English, German, French, Danish, Spanish, Italianand Finnish.Language package 2 consists of:English, German, Chinese, Korean, Japanese,Thai and Bahasa Indonesian.Language package 3 consists of:English, German, Slovenian, Bulgarian, Serbian,Romanian, Hungarian, Czech and Russian.Language package 4 consists of:English, German, Spanish, English US, Greek,Brazilian Portuguese, Turkish and Polish.0-02 Motor Speed UnitValue:RPM [0]Hz [1]Function:Select display of motor speed parameters (i.e.references, feedbacks and limits) in terms of shaftspeed (RPM) or output frequency to the motor(Hz). This parameter cannot be adjusted while themotor is running.FC 300 Design GuideHow to Programmefactory setting () display text [] value for use in communication via serial communication port122 MG.33.B7.02 - VLT is a registered Danfoss trademark
