How to OrderDrive ConfiguratorIt is possible to design an FC 300 frequency converter according to the application requirements by usingthe ordering number SYSTEM.For the FC 300 Series, you can order standard drives and drives with integral options by sending a typecode string describing the product a to the local Danfoss sales office, i.e.:FC-302PK75T5E20H1BGCXXXSXXXXA0BXCXXXXD0The meaning of the characters in the string can be located in the pages containing the ordering numbersin the chapter How to Select Your VLT. In the example above, a Profibus DP V1 and a 24 V back-up optionis included in the drive.Ordering numbers for FC 300 standard variants can also be located in the chapter How to Select YourVLT.From the Internet based Drive Configurator, you can configure the right drive for the right applicationand generate the type code string. The Drive Configurator will automatically generate an eight-digit salesnumber to be delivered to your local sales office.Furthermore, you can establish a project list with several products and send it to a Danfoss sales repre-sentative.The Drive Configurator can be found on the global Internet site: www.danfoss.com/drives.Ordering Form Type CodeFC 300 Design GuideHow to OrderMG.33.B7.02 - VLT is a registered Danfoss trademark 63
