5.2.6 General ConsiderationsWire accessEnsure that proper cable access is present includingnecessary bending allowance. As the IP00 enclosure isopen to the bottom, cables must be fixed to the backpanel of the enclosure where the frequency converter ismounted.NOTEAll cable lugs/shoes must mount within the width of theterminal bus bar.SpaceEnsure proper space above and below the frequencyconverter to allow airflow and cable access. In addition,space in front of the unit must be considered to enableopening of the door of the panel.105298[11.7]404[15.9]130BC519.10Illustration 5.11 Front Clearance of IP21/IP54 Enclosure Type,Frame Size D1h, D5h, and D6h.130BC520.10105523[20.6]395[15.6]Illustration 5.12 Front Clearance of IP21/IP54 Enclosure Type,Frame Size D2h, D7h, and D8h.748(29.5)579(22.8)176FA276.12≤105,0°Illustration 5.13 Front Clearance of IP21/IP54 Enclosure Type,Frame Size E1.130BB003.13578(22.8) 776(30.6)Illustration 5.14 Front Clearance of IP21/IP54 Enclosure Type,Frame Size F12X578[22.8] 776[30.6]130BB004.13Illustration 5.15 Front Clearance of IP21/IP54 Enclosure Type,Frame Size F3130BB005.13624[24.6]579[22.8]578[22.8]Illustration 5.16 Front Clearance of IP21/IP54 Enclosure Type,Frame Size F2624(24.6)2x579(22.8) 578(22.8)130BB006.10Illustration 5.17 Front Clearance of IP21/IP54 Enclosure Type,Frame Size F4How to Install VLT® AQUA Drive FC 202 Design Guide94 MG20Z102 - VLT® is a registered Danfoss trademark55
