Enter/Exit Programming Mode 2D Symbology Programming442 Magellan™ 9300i / 9400i ScannersMicro QR Code Length ControlFixed Length Decoding — When fixed length decoding is enabled, the scannerwill decode a bar code if the label length matches one of the configurable fixedlengths.Variable Length Decoding — When variable length decoding is enabled, the scan-ner will decode a ar code if the label length falls in the range of the configurableminimum and maximum length.Configuring Fixed Length Decoding:1. Scan the ENTER/EXIT Programming Mode bar code.2. Scan the Fixed Length Decoding bar code.3. Scan the ENTER/EXIT Programming Mode bar code.4. Set Length 1 to the first fixed length using the Micro QR Code Length 1,Length 2 Programming Instructions on page 443 that follow this page.5. Set Length 2 to the second fixed length (or to ‘0000’ if there is only onefixed length) using the Micro QR Code Length 1, Length 2 ProgrammingInstructions on page 443.Configuring Variable Length Decoding:1. Scan the ENTER/EXIT Programming Mode bar code.2. Scan the Variable Length Decoding bar code.3. Scan the ENTER/EXIT Programming Mode bar code.4. Set Length 1 to the minimum length using the Micro QR Code Length 1,Length 2 Programming Instructions on page 443 that follow this page.5. Set Length 2 to the maximum length using the Micro QR Code Length 1,Length 2 Programming Instructions on page 443.Micro QR Code Length Control = Variable LengthMicro QR Code Length Control = Fixed LengthDEFAULT042A00(CR)042A01(CR)
