500 Magellan™ 9300i / 9400i Scanners• Label length including check character and excluding prefix charactermust meet requirements imposed by the main scanner’s fixed or variablelabel length control for this symbology type.• Prefix must be an ASCII character ‘@’• Example: ‘@144769254’Code 93• Prefix must be an ASCII character ‘&’• Label length excluding prefix character must meet requirements imposedby the main scanner’s fixed or variable label length control for this sym-bology type.• Example: ‘&Code93-test’GS1 DataBar Omnidirectional• Prefix must be ASCII characters ‘R4’• Check character must be included in label• Application identifier “01” must follow the prefix and precede the baselabel• Label length excluding prefix characters must be 16 characters.• Example: ‘R40101044123456789’GS1 DataBar Expanded• Prefix must be ASCII characters ‘R4’• Label length excluding prefix characters must be at least 1 character.Maximum length is the maximum label size supported by the scanner.• The format of the label must not be of the same format as RSS-14 (appli-cation id ‘01’ & length equal to 16)• Example: ‘R4002900123456789083103001750’Standard 2 of 5 (S 2 of 5)• Prefix must be ASCII character ‘s’• Label length excluding prefix character must meet requirements imposedby the main scanner’s fixed or variable label length control for this sym-bology type.• Example ‘s1234567890’PDF 417• Prefix must be ASCII character ‘P’• Label length excluding prefix character cannot exceed 2714 characters+3, or 2717 characters. In addition to this, label length excluding prefixcharacter must meet requirements imposed by the main scanner’s fixed orvariable label length control for this symbology type.• Example: ‘Ppdf test label’AIM FormatsAIM specifies a 3-character string that is attached as a prefix to the label datafor transmission. Because AIM specifies one identifier for UPCA, UPCE and
