Dell Converged Enhanced Ethernet Command Reference 9353-1002115-01show ip route 5show ip routeDisplays the current IP routing information.Synopsis show ip route {| [ip-address [/mask] |longer-prefixes | static | connected | summary | all]Operands ip-address/mask Mask for the route to be displayed. Valid values are integers between 0 and32.longer-prefixes Specifies that only routes matching the ip-address and mask pair should bedisplayed.static Display static routes only.connected Display connected routes only.summary Summary of all routes.all Shows both inactive and active routes.Description Use this command to display the current IP routing information.Defaults There are no default configurations for this command.CommandModesEXEC modeUser Guidelines There are no usage guidelines for this command.Example Example output of this command:switch>show ip route allCodes: C - connected, S - static, R - RIP, M - mobile, B - BGPD - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter areaN1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGPi - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2ia - IS-IS inter area, * - candidate default, U - per-user static routeo - ODR, P - periodic downloaded static routeGateway of last resort is 10.32.144.1 to network 0.0.0.010.0.0.0/8 is variably subnetted, 2 subnets, 2 masksS 10.0.0.0/8 [1/0] via 10.32.144.1C 10.32.144.0/20 is directly connected, GigabitEthernet4/47S* 0.0.0.0/0 [1/0] via 10.32.144.1See Also show ip route summary
