82 Dell Converged Enhanced Ethernet Command Reference53-1002115-01debug ip5debug ipDisplays the IGMP and ICMP traffic on the switch.Synopsis debug ip {[packet {[interface interface-type interface-number] | [count tx | rx]]}] | [icmp {[interfaceinterface-type interface-number] | [count tx | rx]}] | [igmp {[interface interface-typeinterface-number] | [all] | [group multicast-grp-address]}]Operands packet Enable IP packet debugging.interface Displays the IP traffic for the specified interface only.interface-type Network interface type (external TenGigabitEthernet interface, null,port-channel, or VLAN).interface-numberLayer-2 or layer-3 Interface number.count Stops display after display count packets.tx Counts only transmitted packets.rx Counts only received packets.icmp Displays the ICMP packets.igmp Displays the IGMP packets.all Enable all IGMP debugging.group Enable IGMP debugging for multicast group.multicast-grp-addressMulticast group address.Description Use this command to display all IGMP or ICMP packets received or transmitted. Can be enabledglobally, per interface, or on a multicast group.Defaults There are no default configurations for this command.CommandModesEXEC modeUser Guidelines There are no usage guidelines for this command.Example noneSee Also none
