Dell Converged Enhanced Ethernet Command Reference 14153-1002115-01Chapter10Layer 2 ACL commandsclear counters access-list macClears all the Media Access Control (MAC) ACL counters for all interfaces which have ACL appliedon them or for a specific interface.Synopsis clear counters access-list mac name [interface |port-channel number | {in | ex}tengigabitethernetslot/port| vlan vlan_id]Operands. name Specifies the name of the MAC ACL.interface Use this keyword to specify any of the following interfaces:tengigabitethernetSpecifies a valid 10 Gbps Ethernet interface.slot Specifies a valid slot number.port Specifies a valid port number.port-channel numberSpecifies the port-channel number. The range of valid values is 1-63.vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583.Defaults There are no default configurations for this command.CommandModesPrivileged EXEC modeDescription Use this command to clear counters for all or for a specific interface for MAC access list counters.UsageGuidelinesIf the interface keyword is not specified, then ACL counters on all interfaces which have this ACLapplied are cleared. There are 255 ACL counters supported per port group.Example To clear counters for the configured MAC access list named test on an interface:switch#clear counters access-list mac test interface intengigabitethernet 0/1To clear counters for the configured MAC access list named test on all interfaces on which this ACLis applied:switch#clear counters access-list mac testSee Also show mac access-list, show statistics access-list
