Dell Converged Enhanced Ethernet Command Reference 19953-1002115-01Chapter12Internet Group Management Protocol Commandsclear ip igmp groupClears information related to learned groups in the IGMP protocol module.Synopsis clear ip igmp group [A.B.C.D [interface {in | ex}tengigabitethernet slot/port | interface port-channelnumber | interface vlan vlan_id] | interface {in | ex}tengigabitethernet slot/port | interfaceport-channel number | interface vlan vlan_id]Operands A.B.C.D Specifies the group address, as a subnet number in dotted decimal format(for example, 10.0.0.1), as the allowable range of addresses included in themulticast group.interface Use this keyword to specify any of the following interfaces:intengigabitethernetSpecifies a valid external 10 Gbps Ethernet interface.slot Specifies a valid slot number.port Specifies a valid port number.extengigabitethernetSpecifies a valid internal 10 Gbps Ethernet interface.slot Specifies a valid slot number.port Specifies a valid port number.port-channel numberSpecifies the interface is a port-channel. The range of valid values is 1-63.interface Use this keyword to specify any of the following interfaces:vlan vlan_id Specifies which VLAN interface to display the snooping configuration relatedinformation. The range of valid values is 1-3583.Defaults There are no defaults for this command.CommandModesPrivileged EXEC modeDescription Use this command to clear the group information in the IGMP database, including entries for eithera specific group on all interfaces or specific groups on specific interfaces.UsageGuidelinesThere are no usage guidelines for this command.Examples To clear information for all groups in the IGMP protocol:switch#clear ip igmp group
