Dell Converged Enhanced Ethernet Command Reference 10153-1002115-01clear lldp neighbors 6clear lldp neighborsClears the Link Layer Discovery Protocol (LLDP) neighbor information on all or specified interfaces.Synopsis clear lldp neighbors interface [{in | ex}tengigabitethernet slot/port]Operands interface Use this keyword to specify the 10 Gbps Ethernet interface using the followingoperand followed by the slot or port number.extengigabitethernetSpecifies a valid external 10 Gbps Ethernet interface.slot Specifies a valid slot number.port Specifies a valid port number.intengigabitethernetSpecifies a valid internal 10 Gbps Ethernet interface.slot Specifies a valid slot number.port Specifies a valid port number.Defaults There are no default configurations for this command.CommandModesPrivileged EXEC modeDescription Use this command to clear the LLDP neighbor information about the devices learned through aninterface.UsageGuidelinesIf the interface operand is not specified, this command clears the LLDP neighbor informationreceived on all the interfaces.Examples To clear the LLDP information for all interfaces:switch#clear lldp neighborsSee Also show lldp neighbors
