236 Dell Converged Enhanced Ethernet Command Reference53-1002115-01show rmon15show rmonDisplays the current RMON status on the switch.Synopsis show rmon [alarms [number] [brief] | events [number] [brief] | logs [event_number] | statistics[number] [brief]]Operands alarms Specifies to display the RMON alarm table.number Specifies the alarm index identification number. The range of valid values is1-65535.brief Specifies to display a brief summary of the output.events Specifies to display the RMON events table.number Specifies the event index identification number. The range of valid values is1-65535.brief Specifies to display a brief summary of the output.logs Specifies to display the RMON log table.event_number Specifies the event index identification number. The range of valid values is1-65535.statistics Specifies to display the statistics identification number.number Specifies the statistics identification number. The range of valid values is1-65535.brief Specifies a brief summary of the output.Defaults There are no default configurations for this command.CommandModesEXEC modeDescription Use this command to display the status of the current RMON on the switch.UsageGuidelinesThere are no usage guidelines for this command.Examples To display the RMON statistics:switch#show rmon statisticsrmon collection index 4Interface index is Id: 67108864 , Name : InTenGigabitEthernet 0/0Receive Statistics:218903 packets, 14015626 bytes, 0 packs droppedMulticasts: 218884, Broadcasts: 18Under-size : 0, Jabbers: 0, CRC: 0Fragments: 0, Collisions: 064 byte pkts: 218722, 65-127 byte pkts: 174128-255 byte pkts: 0, 256-511 byte pkts: 6512-1023 byte pkts: 0, 1024-1518 byte pkts: 0Over 1518-byte pkts(Oversize - Jumbo): 0
