262 Dell Converged Enhanced Ethernet Command Reference53-1002115-01show qos maps16show qos mapsDisplays information on the defined QoS maps.Synopsis show qos maps [{cos-mutation [name] | cos-traffic-class [name]}]Operands cos-mutation nameSpecifies to report on only the named CoS-to-CoS mutation QoS map.cos-traffic-class nameSpecifies to report on only the named CoS-to-Traffic Class QoS maps.Defaults The default behavior without any specified operands is to report on all defined QoS maps.CommandModesEXEC modeDescription Use this command to display information on the QoS defined maps. For each QoS map, theconfiguration state is displayed with a list of all interfaces bound to the QoS map.UsageGuidelinesThere are no usage guidelines for this command.Examples To display information on the defined QoS maps:switch#show qos mapsCoS-to-CoS Mutation map 'test'In-CoS: 0 1 2 3 4 5 6 7--------------------------------Out-CoS: 0 1 2 3 5 4 6 7Enabled on the following interfaces:Te 0/5CoS-to-Traffic Class map 'test'Out-CoS: 0 1 2 3 4 5 6 7-------------------------------------TrafficClass: 0 1 2 3 5 4 6 7Enabled on the following interfaces:Te 0/5See Also qos maps, show qos interface
