Embedded Web Server does not openAction Yes NoStep 1a Turn on the printer.b Open a Web browser, and then type the printer IP address.c Press Enter.Does the Embedded Web Server open?The problem is solved. Go to step 2.Step 2Make sure the printer IP address is correct.a View the printer IP address:• From the TCP/IP section in the Network/Ports menu• By printing a network setup page or menu settings page, and thenfinding the TCP/IP sectionNote: An IP address appears as four sets of numbers separatedby periods, such as 123.123.123.123.b Open a Web browser, and then type the IP address.Note: Depending on the network settings, you may need to type“https://” instead of “http://” before the printer IP addressto access the Embedded Web Server.c Press Enter.Does the Embedded Web Server open?The problem is solved. Go to step 3.Step 3Check if the network is working.a Print a network setup page.b Check the first section of the network setup page and confirm that thestatus is Connected.Note: If the status is Not Connected, then the connection may beintermittent, or the network cable may be defective. Contact yoursystem support person for a solution, and then print anothernetwork setup page.c Open a Web browser, and then type the printer IP address.d Press Enter.Does the Embedded Web Server open?The problem is solved. Go to step 4.Step 4Check if the cable connections to the printer and print server are secure.a Connect the cables properly. For more information, see the setupdocumentation that came with the printer.b Open a Web browser, and then type the printer IP address.c Press Enter.Does the Embedded Web Server open?The problem is solved. Go to step 5.Troubleshooting 144
